List of Figures in IGES Version 5.x

1 Categories of Product Definition
2 Format of the Start section in the ASCII Form
3 Format of the Directory Entry (DE) Section in the ASCII Form
4 Format of the Parameter Data (PD) section in the ASCII Form
5 Format of the Terminate section in the ASCII Form
6 General file structure in the Compressed ASCII Format
7 Multiple Transformation Cases
8 Interpretation of ZT Displacement (Depth) for Annotation Entities
9 Entity Usage According to System Category.
10 Subfigure Structures
11 General Connectivity Pointer Diagram
12 External Linkages
13 Finite Element Modeling File Structure
14 Finite Element Modeling Logical Structure
15 Examples Defined Using the Circular Arc Entity
16 Parameterization of the Composite Curve
17 Example Defined Using the Composite Curve Entity
18 Examples Defined Using the Conic Arc Entity
19 Examples Defined Using the Centerline Entity
20 Definition of Patterns for the Section Entity
21 Examples Defined Using the Witness Line Entity
22 Examples Defined Using the Plane Entity
23 Examples Defined Using the Line Entity
24 Parameters of the Parametric Spline Curve Entity
25 Examples Defined Using the Parametric Spline Curve Entity
26 Parameters of the Parametric Spline Surface Entity
27 Examples Defined Using the Point Entity
28 Examples Defined Using the Ruled Surface Entity
29 Parameters of the Ruled Surface Entity
30 Examples Defined Using the Surface of Revolution Entity
31 Parameters of the Surface of Revolution Entity
32 Parameters of the Tabulated Cylinder Entity
33 Example of the Transformation Matrix Coordinate Systems
34 Notation for FEM-specific Forms of the Transformation Matrix Entity
35a Definition of Shapes for the Flash Entity
35b Definition of Shapes for the Flash Entity
36 Nodal Displacement Coordinate Systems
37a Finite Element Topology Set
37b Finite Element Topology Set
37c Finite Element Topology Set
37d Finite Element Topology Set
37e Finite Element Topology Set
37f Finite Element Topology Set
38 Offset Surface in 3-D Euclidean Space
39 Parameters of the CSG Block Entity
40 Parameters of the CSG Right Angular Wedge Entity
41 Parameters of the CSG Right Circular Cylinder Entity
42 Parameters of the CSG Right Circular Cone Frustum Entity
43 Parameters of the CSG Sphere Entity
44 Parameters of the CSG Torus Entity
45 Parameters of the CSG Solid of Revolution Entity
46 Parameters of the CSG Solid of Linear Extrusion Entity
47 Parameters of the CSG Ellipsoid Entity
48 Construction of Leaders for the Angular Dimension Entity
49 Examples Defined Using the Angular Dimension Entity
50 Examples Defined Using the Diameter Dimension Entity
51 Parameters of the Flag Note Entity
52 Examples Defined Using the Flag Note Entity
53 Examples Defined Using the General Label Entity
54 General Note Font Specified by FC 17
55 General Note Font Specified by FC 1001
56 General Note Font Specified by FC 1002
57 General Note Font Specified by FC 1003
58 Examples Defined Using the General Note Entity
59 General Note Text Construction
60 General Note Example of Text Operations
61 Examples of Drafting Symbols That Exceed Text Box Height
62 Examples Defined Using the Leader Entity
63 Structure of Leaders Internal to a Dimension
64 Definition of Arrowhead Types for the Leader (Arrow) Entity
65 Examples Defined Using Form 0 of the Linear Dimension Entity
66 Examples Defined Using the Ordinate Dimension Entity
67 Examples Defined Using the Point Dimension Entity
68 Examples Defined Using the Radius Dimension Entity
69 Examples Defined Using the General Symbol Entity
70 Predefined Fill Patterns for the Sectioned Area Entity
71 Examples of Nested Definition Curves
72 Examples of Illegal Definition Curves
73 Example of Illegal Relationship for Definition Curves
74 Example of Two Ways to Define an Area
75 Relationships Between Entities in an Associativity
76 Line Font Definition Using Form Number 1 (Template Subfigure)
77 Line Font Definition Using Form Number 2 (Visible-Blank Pattern)
78 Example of a Character Definition
79 Example of a Character Definition
80 Dimensioned Geometry Associativity
81 Using Clipping Planes with a View in a Drawing
82 Parameters of the Drawing Entity
83 Measurement of the Line Widening Property Values
84 Relationship Between Properties Used to Represent a Composite Material
85 Use of the Vector D to Define the Element Material Coordinate System
86 Internal Load and Strain Sign Convention
87 Relationship Between Subfigure Definition and Subfigure Instance
88 Orthographic Parallel Projection of AB on a View Plane
89 View Coordinate System
90 Planes Defining the View Volume
91 Relationship Between the Nodal Load/Constraint Entity and Tabular Data Properties
A1 Electrical Part Example
A2 Mechanical Part Example
A3 Drawing and View Example
F1 Obsolete General Note Font specified by FC 0
G1 Finite Element Topology Set
G2 Hierarchical nature of the MSBO
G3 Construction of the MSBO
G4 Defining data for unparameterized plane surface (Form Number = 0).
G5 Defining data for parameterized plane surface (Form Number = 1).
G6 Defining data for unparameterized right circular cylindrical surface (Form Number = 0).
G7 Defining data for parameterized right circular cylindrical surface (Form Number = 1).
G8 Defining data for unparameterized right circular conical surface (Form Number = 0).
G9 Defining data for parameterized right circular conical surface (Form Number = 1).
G10 Defining data for unparameterized spherical surface (Form Number = 0).
G11 Defining data for parameterized spherical surface (Form Number = 1).
G12 Defining data for unparameterized toroidal surface (Form Number = 0).
G13 Defining data for parameterized toroidal surface (Form Number = 1).
G14 Examples Defined Using the Curve Dimension Entity
G15 General Note Font (OCR-B) Specified by FC 19
G16 Text Containment Area
G17 Character Height, Inter-line Spacing
G18 Character Width, Interspace, Box Width
G19 Examples of Fixed Width Character Interspace
G20 Rotation, Slant and Character Angle
G21 Text Containment Area
G22 Character Height, Width, Interspace, Box Width
G23 Character Height, Width, Interspace, Box Width
G24 Example Defined Using the Ordinate Dimension Entity
G25 Example Defined Using the Radius Dimension Entity
G26 Examples of Symbols Defined Using New Form Numbers of the General Symbol Entity
G27a Predefined Fill Patterns for the Sectioned Area Entity
G27b Predefined Fill Patterns for the Sectioned Area Entity
G27c Predefined Fill Patterns for the Sectioned Area Entity
G28a Examples of Standard and Inverted Crosshatching.
G28b Examples of Standard and Inverted Crosshatching.
G28c Examples of Standard and Inverted Crosshatching.
G29 Parameters of the Isoceles Triangle Macro in Example 1 in Text
G30 Repeated Parallelograms Created by Macro Example 2 in Text
G31 Concentric Circles Created by Macro Example 3 in Text
G32 Ground Symbol Created by Macro Example 4 in Text
G33 Use of DOF with Angular Dimensions.
G34 Use of DOF with Linear and Ordinate Dimensions.
G35 Use of DLF.
G36a Illustrations of Line Font Patterns for Different Values of LFPC
G36b Illustrations of Line Font Patterns for Different Values of LFPC
G37 Examples of tolerance formats (UTOL = 0.01, LTOL = -0.02)
G38 Placement of Text Using TP and TL.
G39 Definition of a Perspective View
I40 Format of the Control Byte Used in the Binary Form
I41 Format of an Integer Number in the Binary Form
I42 Format of a Real Number in the Binary Form
I43 Structure of a String Constant in the Binary Form
I44 General File Structure in the Binary Form
I45 Format of the Binary Flag Section in the Binary Form
I46 Format of the Start Section in the Binary Form
I47 Format of the Global Section in the Binary Form
I48 Format of the Directory Entry (DE) Section in the Binary Form
I49 Format of the Parameter Data (PD) Section in the Binary Form
I50 Format of the Terminate Section in the Binary Form