**************  Global Section  **************

Parameter Delimiter Character    = ","
Record Delimiter Character       = ";"
Product ID from Sender           = "NENTITY"
File Name                        = "NENTITY.IGS"
System ID                        = "(unspecified)"
Pre-processor Version            = "(unspecified)"
Number of Bits for Integers      = 16
Single Precision Magnitude       = 6
Single Precision Significance    = 15
Double Precision Magnitude       = 13
Double Precision Significance    = 15
Product ID for Receiver          = "NENTITY"
Model Space Scale                = 1.00000
Unit Flag                        = 1 - Inches
Units                            = "INCH"
Maximum Number of Line Weights   = 8
Size of Maximum Line Width       = 0.0160000
Date & Time Stamp                = "920717.080000"
Minimum User-intended Resolution = 0.000100000
Approximate Maximum Coordinate   = 22.0000
Name of Author                   = "Jill Farrell"
Author's Organization            = "CALS Test Network"
IGES Version Number              = 6 - IGES Version 4.0 [NBS88]
Drafting Standard Code           = 0 - None Specified

************  Terminate Section  *************

     33 records in Start Section
      3 records in Global Section
    676 records in Directory Entry Section (338 entities)
    972 records in Parameter Data Section

************  Counts of ENT:FORM  ************

    19 = 100:0000 Circular Arc
     2 = 102:0000 Composite Curve
     1 = 104:0000 Conic Arc:<unknown - obsolete!>
     1 = 104:0001 Conic Arc:Ellipse
     1 = 104:0002 Conic Arc:Hyperbola
     1 = 104:0003 Conic Arc:Parabola
     3 = 106:0011 Copius Data:Piecewise Linear Curve (2D)
     1 = 106:0012 Copius Data:Piecewise Linear Curve (3D)
     1 = 106:0020 Copius Data:Centerline (through points)
     1 = 106:0021 Copius Data:Centerline (through circle centers)
     1 = 106:0031 Copius Data:Section (Iron, General Use)
     1 = 106:0032 Copius Data:Section (Steel)
     1 = 106:0033 Copius Data:Section (Bronze, brass, copper, etc.)
     1 = 106:0034 Copius Data:Section (Rubber, plastic, etc.)
     1 = 106:0035 Copius Data:Section (Titanium, etc.)
     1 = 106:0036 Copius Data:Section (Marble, slate, glass, etc.)
     1 = 106:0037 Copius Data:Section (Zinc, lead, etc.)
     1 = 106:0038 Copius Data:Section (Magnesium, aluminum, etc.)
     6 = 106:0040 Copius Data:Witness Line
     4 = 106:0063 Copius Data:Simple Closed Planar Curve
     8 = 108:0000 Plane:Unbounded
     1 = 108:0001 Plane:Bounded
    75 = 110:0000 Line
     5 = 112:0000 Parametric Spline Curve
     3 = 114:0000 Parametric Spline Surface
    12 = 116:0000 Point
     3 = 118:0000 Ruled Surface:Equal Relative Arc Length
     1 = 118:0001 Ruled Surface:Equal Relative Parametric Values
     1 = 120:0000 Surface of Revolution
     1 = 122:0000 Tabulated Cylinder
     8 = 124:0000 Transformation Matrix:Right-handed (default)
     1 = 124:0001 Transformation Matrix:Left-handed
     1 = 126:0000 Rational B-Spline Curve - <computationally derived>
     1 = 128:0000 Rational B-Spline Surface - <computationally derived>
     1 = 128:0002 Rational B-Spline Surface:Right Circular Cylinder
     1 = 128:0003 Rational B-Spline Surface:Cone
     1 = 128:0004 Rational B-Spline Surface:Sphere
     1 = 128:0005 Rational B-Spline Surface:Torus
     1 = 128:0009 Rational B-Spline Surface:General Quadratic Surface
     1 = 130:0000 Offset Curve
     1 = 140:0000 Offset Surface
     2 = 142:0000 Curve on a Parametric Surface
     1 = 144:0000 Trimmed (Parametric) Surface
     1 = 202:0000 Angular Dimension
     1 = 206:0000 Diameter Dimension
     1 = 210:0000 General Label
    96 = 212:0000 General Note:Simple Note (default)
     1 = 212:0001 General Note:Dual Stack
     1 = 212:0002 General Note:Imbedded Font Change
     1 = 212:0003 General Note:Superscript
     1 = 212:0004 General Note:Subscript
     1 = 212:0005 General Note:Superscript, Subscript
     1 = 212:0006 General Note:Multiple Stack, Left Justify
     1 = 212:0007 General Note:Multiple Stack, Center Justify
     1 = 212:0008 General Note:Multiple Stack, Right Justify
     1 = 212:0100 General Note:Simple Fraction
     1 = 212:0101 General Note:Dual Stack Fraction
     1 = 212:0102 General Note:Imbedded Font Change, Double Fraction
     1 = 212:0105 General Note:Superscript, Subscript Fraction
     1 = 214:0001 Leader/Arrow:Wedge
    12 = 214:0002 Leader/Arrow:Triangle
     1 = 214:0003 Leader/Arrow:Filled Triangle
     4 = 214:0004 Leader/Arrow:No Arrowhead
     1 = 214:0005 Leader/Arrow:Circle
     1 = 214:0006 Leader/Arrow:Filled Circle
     1 = 214:0007 Leader/Arrow:Rectangle
     1 = 214:0008 Leader/Arrow:Filled Rectangle
     1 = 214:0009 Leader/Arrow:Slash
     1 = 214:0010 Leader/Arrow:Integral Sign
     1 = 214:0011 Leader/Arrow:Open Triangle
     2 = 216:0000 Linear Dimension:Undetermined (default)
     2 = 218:0000 Ordinate Dimension:Witness or Leader
     1 = 220:0000 Point Dimension
     1 = 222:0000 Radius Dimension:Single Leader Format
     1 = 228:0000 General Symbol:General Symbol (default)
     1 = 228:0001 General Symbol:Datum Feature Symbol
     1 = 228:0002 General Symbol:Datum Target Symbol
     1 = 228:0003 General Symbol:Feature Control Symbol
     1 = 230:0000 Sectioned Area:Default
     1 = 308:0000 Subfigure Definition
     1 = 404:0000 Drawing:Normal Drawing (default)
     3 = 406:0015 Property:Name
     1 = 406:0016 Property:Drawing Size
     1 = 406:0017 Property:Drawing Units
     2 = 408:0000 Singular Subfigure Instance
     2 = 410:0000 View:Orthogonal (default)

There are 338 entities in this file.